The easier it is to find a conventional drill in the average home, the rarer it is to find a Right Angle one. Still, you’ll hardly see a handyman without one such as DEWALT DCD740C1 Right Angle Drill

This because repair and maintenance work often require drilling or screwing in tight corners or at troublesome angles. Even the best cordless drill is too large and bulky to fit into such spaces. You may even want to drill something overhead, in which case it’s too heavy to maintain control.

The DEWALT DCD740C1 20V Right Angle Drill is lightweight and compact. It can easily be lifted over the head or made to reach awkward spaces. Areas behind beams or behind furniture are some locations that would otherwise be difficult to reach with a regular drill.

As we mentioned, The 90-degree drill is the handyman’s favourite tool. This because of the versatility they provide. Plumbers and electricians usually have to work in compact spaces and at awkward angles. Right Angle drills are explicitly designed to simplify such uncomfortable tasks.

When talking of drills in general, there are only a few companies that are held in as high a regard as DeWalt. Like many of its tools, the Dewalt right angle drill is an essential element of any toolbox. The drill offers itself as a complete solution for awkward drilling and screwing tasks.

The DEWALT DCD740C1 Right Angle Drill has a lightweight and ergonomically designed for secure handling and control compared to other Dewalt right angle drill. A small head and a keyless 3/8-inch chuck are sufficiently compact to compliment the drill’s design choices. Other useful features such as adjustable speed settings and a work light make it an attractive offering.

Ergonomic Design 

Right Angle drills are compact tools, and this design choice serves a purpose. It makes the exercise more effective at difficult tasks. DeWalt focuses on this aspect and makes its Dewalt 20 volt right angle drill

one of the lightest and smallest devices on the market. This compact design gives it an edge over other cordless drills.

When unboxed, the drill weighs a total of 4 lbs. And the head measures only at 4 inches. This makes it more compact than many other 90 degree drillS out there. DeWalt’s famous ergonomic handle makes an appearance here as well. It’s designed with soft rubberized materials to enhance grip and reduce discomfort when the drill is being used for more extended periods.

A vital aspect of the drill’s ergonomic design is the large trigger that DeWalt chose to opt for. At first glance, this may look like a weird design choice, but it makes more sense than you think. As Right Angle drills are normally used at odd angles, it gets challenging to keep the trigger pressed for a long time. A large trigger ensures that pressing it is comfortable in all aspects.

Another useful addition to the drill is an LED work light. The tight corners that Right Angle drills are designed for can get dark. The darker the edge, the more difficult it is to drill accurately. A smartly placed LED lights up the work surface and eliminates chances of error due to visibility.

Powerful Performance

The DEWALT DCD740C1 Right Angle Drill packs a powerful engine that can achieve an impressive speed of 2,000 RPM. This speed can be controlled as required with the included two-speed transmission. Users can choose between low- and high-speed settings.

On low settings, the RPM is limited to 650, while users can unleash the full 2,000 RPM on high settings. The high setup drains more battery but also makes tasks faster. Drilling takes less time and becomes more effortless with the transmission set to high.

With the transmission limited to 650 RPM, the engine’s torque increases tremendously. Users can make use of this enhanced torque to drive screws more efficiently. The increased torque makes driving screws easier and enhances precision.

The compact keyless chuck also adds to the overall efficiency of the device. The chuck makes use of a deep hex pocket design. This design choice allows for more significant hex bits to be installed without adding much to the length of the head. While the drill’s functionality increases, it retains its compact size.

The drill uses the same detachable batteries as the rest of DeWalt’s 20V tools. This means that the cells can be swapped between devices in case the charge runs out during a job. The battery doesn’t require frequent recharge and lasts quite well on low speed.

DEWALT DCD740C1 Right Angle Drill Specifications

• Lightweight, maxing out at 4 lbs.
• Compact design results in more comfortable usage in tight spaces
• A large trigger for easy handling in awkward positions
• Soft rubber grip enhances comfort
• Deep hex bits keep the drill’s length short
• LED work light for better visibility in dark spaces

Customer Reviews and Conclusion

Dewalt 20 volt right angle drill is one of the best DeWalt angle drills on the market, and customers agree. Several users compliment DeWalt’s design choice for the right angle. The ergonomic design makes the tool easy to use and comfortable to handle.

Users have been impressed with how well the drill’s grip reduces strain on the hand, even when handling it for long periods. Some users compare it to other cordless right angle drills that aren’t so comfortable to handle and cause hand cramps. Part of this design choice that received so much recognition from users is the large trigger.

Some regular DIYers also praised the drill’s keyless chuck. Users noted that the chuck does indeed delivers on what it promises. When fitting the exercise with hex bits to increase functionality, the end-result doesn’t increase the drill’s length too much. This doesn’t affect its functionality in tight spaces.

However, the tool doesn’t come without its flaws. Users expressed discontent at the absence of an LED charge indicator. Without a sign, it becomes difficult to know when the charge is going to run out. On the bright side, the charge lasts a long time. Recharging after a few tasks is generally a good idea.

This  DeWalt 20V MAX Right-Angle is one of the best Right Angle power tools you can buy. For screwing and drilling tasks, this tool is a great choice. It’s easy to control and comfortable to hold. Its compact design also makes it incredibly versatile in different situations.